Another day in a geek’s life

Ura je nekaj čez 11... sedim na predavanjih iz pstk, in po 40ih minutah uploada mi je ratal zagnat uClinux (sicer verzijo iz leta 2005, ampak tudi to je bolje kot tisto včeraj).

in še rezultat:

**********************************************
* LPC2468 OEM Board from Embedded Artists AB *
*              EA-version: 1.4               *
*          www.EmbeddedArtists.com           *
**********************************************
Booting (may take some time)...
U-Boot 1.1.6 (Feb 17 2007 - 09:10:30)
DRAM:  32 MB
Flash:  2.5 MB
NAND:  128 MiB
In:    serial
Out:   serial
Err:   serial
Hit any key to stop autoboot:  0
Booting from NAND FLASH (may take some seconds)
First loads linux.bin and then romfs.bin
NAND read: device 0 offset 0x0, size 0x200000
 2097152 bytes read: OK
NAND read: device 0 offset 0x200000, size 0x400000
 4194304 bytes read: OK
## Starting application at 0xA0008000 ...
Linux version 2.6.11.8-hsc0 (root@eadevenv) (gcc version 2.95.3 20010315 (release)
   (ColdFire patches - 20010318 from http://fiddes.net/coldfire/)(uClinux X8
CPU: Philips-lpc24xx [24000000] (ARMv3)
Machine: LPC24xx, NXP
Warning: bad configuration page, trying to continue
Built 1 zonelists
Kernel command line: root=/dev/ram initrd=0xA1800000,4000k console=ttyS0,38400N8
PID hash table entries: 256 (order: 8, 4096 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 32MB = 32MB total
Memory: 26632KB available (1531K code, 163K data, 76K init)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
Freeing initrd memory: 4000K
NET: Registered protocol family 16
NetWinder Floating Point Emulator V0.97 (double precision)
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
þttyS0 at MMIO 0x0 (irq = 6) is a 16550A
ttyS1 at MMIO 0x0 (irq = 7) is a 16550A
io scheduler noop registered
io scheduler deadline registered
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Creating 1 MTD partitions on "ROM":
0x00000000-0x00200000 : "ROMfs"
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
RAMDISK: romfs filesystem found at block 0
RAMDISK: Loading 2725KiB [1 disk] into ram disk... done.
VFS: Mounted root (romfs filesystem) readonly.
Freeing init memory: 76K
Welcome to
          ____ _  _
         /  __| ||_|
    _   _| |  | | _ ____  _   _  _  _
   | | | | |  | || |  _ \| | | |\ \/ /
   | |_| | |__| || | | | | |_| |/    \
   |  ___\____|_||_|_| |_|\____|\_/\_/
   | |
   |_|
For further information check:

http://www.uclinux.org/

Board specific drivers by Embedded Artists AB

http://www.EmbeddedArtists.com<

(Release 2007-04-30: Check for updates)

Using /drivers/lpc2468eth.ko
strToInt: illegal character :
strToInt: illegal character :
strToInt: illegal character emac: found MAC address in u-boot env. = 00:1a:f1:00:02:0c:
  Error: phyInit wrong id2 (161b != 161a)
insmod: cannot insert `/drivers/lpc2468eth.ko': No such device (-1): No such device
Using /drivers/lpc2468mmc.ko
  Error: Memory card could not be found
insmod: cannot insert `/drivers/lpc2468mmc.ko': Resource temporarily unavailable (-1):
    Resource temporarily unavailable
Using /drivers/lcd.ko
  Error: No LCD connected? (R49=3100 != 0x10).
insmod: cannot insert `/drivers/lcd.ko': No such device (-1): No such device
Using /drivers/adc.ko
Using /drivers/i2c.ko
Using /drivers/pwm.ko
Using /drivers/sfr.ko
Using /drivers/udc.ko
Using /drivers/rtc.ko
Using /drivers/spi.ko
mount: Mounting /dev/mmca1 on /mnt/mmc failed: No such device or address
SIOCSIFADDR: No such device
SIOCGIFFLAGS: No such device
init: Booting to single user mode
#
# cd /dev
# ls
mmca3    ttyp2    zero     ptypb    pwm06    console  ptyp6    pwm04
rom8     ptypd    ttyS1    rom0     ptyp7    rom7     pwm16    tty0
ttyS0    ptypa    random   ptyp0    ptyp3    lcd      pca9532  ptyp8
mmca     ttyp1    rom5     ttyp3    cua1     ptyp1    pwm13    tty
ttypb    ptypf    tty1     ttyp0    spi      pwm05    ptyp4    ptypc
urandom  ram1     ttypa    adc0     adc1     pwm03    ram0     pwm11
ptype    pwm01    rom4     rtc      mem      ttypc    kmem     tty3
ttyp8    ptyp9    cua0     ptyp2    ttyp7    ttyp6    eem      pwm14
ttyp5    mmca1    rom3     adc3     ttypd    pwm15    ttyp4    adc2
rom6     rom1     ttyp9    mmca2    rom9     rom2     null
pwm12    ttypf    tty2     ttype    ptyp5    sfr      pwm02
#

Progress je Mam še par ur predavanj.. ravno prav da skmpajlam še novejšo verzijo, po možnosti še s kakim dodatnim programom in si izmislim kaj koristnega, kar bi lahko s tem naredil